Flyline solar charging device is regulate the voltage and current coming from the solar panels going to the battery. Most “12 volt” and “24 volt” panels out put is 16 to 20 and 26 to30 volts, if we connect this solar cell directly to the battery or any other electronic equipments it will damage within a period. Murickens manufactured renewable energy charge regulator with several safety features including the prevention of overcharging the battery bank during peak sun output, and discharging the battery bank through the solar array at night.
Murickens manufactured and market three types of charging controllers MOSFET circuit , IGBT circuit and MPPT circuit charging controller with international quality.
SOLAR CHARGING CONTROLLER INFORMATIVE VIDEOS
FLYLINE SOLAR CHARGE CONTROLLER IMAGES:-CLICK HERE
FLYLINE Pulse Width Modulation Solar Charging Controllers (PWM) Common Features
* The main advantage of Flyline Solar Charger is high efficient " Zero Drop" (we get 100 % efficiency).*Comparing to MPPT, there is no heat conversion efficiency lose in this special model. *German MPCT ( Maximum power converting technology ) Technology assures the quality of product.* ISO 9001- 2015 certified Flyline Solar Charger. * It is commonly used products. * This charging controllers are used for smaller and medium power controlling units. * The technical features are same with IGBT. * The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, Overload and Short circuit. * Our product connection diagram printed on it.*Micro controller based. *LED, bar glass or LCD - display-battery voltage, load on/off, battery condition charging on/off. *Up to 70 amp auto detection for 12v/24v (automatic sensing).
FLYLINE PWM/MOSFET SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Switching
Zero drop back to back PWM MOSFET base
Nominal battery voltage
12 V to 48 V DC
Maximum out put amp
4AMP- 100 AMP
Stand by consumption
less than 1w
Charging REG
2 stage
Battery tem combination
5MV@40DIG
Product Display
LED, bar graph or LCD
Max. panel input voltage
16V@12V
Battery input
8 to15 Volt (for 12 V).19 to 30 Volt ( for 24 V)
Panel input
10 to30 Volt (for 24 V).21 to 60 Volt ( for 24 V)
Battery input
32 to 60 Volt ( for 48 V)
Panel input
40 to 120 Volt ( for 48 V)
Mobile charging
USB & DC SOCKET in small capacities
DC LOAD
UN REGULATED
Efficiency
100 %
Flyline IGBT Solar Charging Controllers common features
*It is used for high voltage regulations. ?German Technology assures the quality of Flyline Solar Charger.*ISO 9001- 2015 certified *Zero Drop model (we get 100 % efficiency). *It is commonly used products. *IGBT charging controllers are used for medium and higher power controlling units. *The technical features of MOSFET and IGBT are same. *The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, overload and short circuit. ?Micro controller base. ?LCD display-panel voltage , battery voltage, out current, solar in use, direct mains, saved unit.
Flyline IGBT Solar Charging Controllers
Switching
Zero drop back to back PWM MOSFET base
Nominal battery voltage
12 V to 48 V DC
Maximum out put amp
4AMP- 80 AMP
Stand by consumption
less than 1w
Charging REG
2 stage
Battery tem combination
5MV@40DIG
Product Display
LED, bar graph or LCD
Max. panel input voltage
16V@12V
Battery input
8 to15 Volt (for 12 V).19 to 30 Volt ( for 24 V)
Panel input
10 to30 Volt (for 24 V).21 to50 Volt ( for 36 V)
Battery input
32 to 60 Volt ( for 48 V)
Panel input
40 to 120 Volt ( for 48 V)
Mobile charging
USB & DC SOCKET in small capacities
DC LOAD
UN REGULATED
Efficiency
100 %
MPPT ( maximum power point Tracker) charging controller
* In the art of solar MPPT (Maximum Power Point Tracker) determines the ideal operating point via processor –controller algorithm. This significantly of incident light and temperature.
* The control system controls the whole system taking care of battery over charging cut off, deep discharging cut off, protections in battery reverse, PV reverse, overload and short circuit.
*MPPT Solar Charger have a power to increases the photovoltaic array power yield.
*It is most suitable for smaller power applications. If we use for higher application heat conversion lose is very high.
*Micro controller base.
*LCD display-panel voltage , battery voltage, out current, solar in use, direct mains, saved unit,
FLYLINE MPPT SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
FLYLINE MPPT SOLAR CHARGER CONTROLLER TECHNICAL FEATURES
Nominal battery voltage
12v to 192 v dc
Maximum out put amp
40 to 80amp
Maximum solar array
2000 w @40 amp, 4000w@ 80 amp in 48 v
PV open CKT voltage
120v @48 v design
Stand by consumption
less than 2w
Charging REG
5 stage
Battery tem combination
5MV@40DIG
Switching method
Buck boost DC to DC converter
Maximum Efficiency
98%
Flyline Standard models solar chargers are: 6 A, 10A, 15A, 20A and up to 200 A