FLAT PLATECONVERTER
First one Flat plate collector (FPC) – An insulated, weather-proofed box containing a dark absorber plate under one or more transparent or translucent covers. This is the most common type solar water heater. Murickens has tested and proved since 30 years that it is the most suitable type for Kerala's climatic conditions and get 80°C hot water with the help of only normal sunlight. We have Pressurized MG solar water heater and Non -pressure solar water heater in FPC model.
Murickens Kerala solar water heating device contains the solar collector panels, the working fluid (water) and the storage tank. Special black or dark green coatings are used to absorb the energy. The heat absorbed by collector panels with size of 2 meter length and 1 meter width with 9 fins is used to heat water in normal capacities. When solar collectors are exposed to sun light, the water flowing through tubes in the panels is heated. Copper tubes transfer the collected heat to the water more effectively than aluminum, steel or glass tubes. The covering over the collector reduces the escape of collected heat to the outside air. The cover is transparent to short-wave solar radiation, but not to infrared radiation from the selective surface. The back and side insulation, typically R-value 12, reduces conduction losses. Heated water from solar panel collects in a storage tank which is specially designed to preserve the heat for a longtime.
MG SOLAR WATER HEATER FEATURES:
► Maintenance free. ► Water heated up to 80°C. ► No electrical hazard. ► No expenses after installation. ► The best way of getting natural hot water for cooking and industrial purpose ► Copper capillaries. ► P U F system and glass wool to avoid conduction loss for storage tank. ► Light weight. ► T I G welded fins and tubes. ► Compact in size. ► Heat expulsion. ► Fully automatic. ► High quality tempered 4mm thick front glass. ► Sturdy and weather proof design. ► Different Capacity starting from 125 liters to 10000 liters. ► Custom built Solar Water Heater can also be provided. ► Two models FPC and ETC. ► In FPC special model we can connect pressure pump.
MG SOLAR FPC WATER HEATER TECHNICAL SPECIFICATION:
| MG solar water heater FPC model | 125 | 150 | 200 | 250 | 500 | 1000 | 3000 |
| Usage No. of person | 30 ltr Per Person | ||||||
| Installation Area(sq. mt) | 4 | 4 | 8 | 8 | 16 | 32 | 96 |
| Water output temp. (° C) | 85 ± 5 °C under normal Sunny conditions | ||||||
| Solar Flat Plate Collector Details | |||||||
| FPC Capillary Tube Model : No. fins | 9/Panel | ||||||
| Collector Material | Copper | ||||||
| Collector box Coating | Extruded Aluminum Powder Coated | ||||||
| Collector Size | 2050 mm x 1050 mm x100 mm per Panel | ||||||
| Insulation | High Density rock wool/puf insulation | ||||||
| Beading | Beading & Grommet - E P D M | ||||||
| Reflector | Aluminum foil of 0.015 mm thickness | ||||||
| Front Glazing | 4mm Thick Toughened glass | ||||||
| Bottom Plate | Aluminum Sheet | ||||||
| Gasket | Gasket for flanges - Neoprene Rubber | ||||||
|
|||||||
| Coating | Selective black chrome – Nalsun | ||||||
| TIG welded copper-copper FIN & Tubes with black nickel chromium | |||||||
| Coating (solar selectively coated) Raised dia 12.5 mm | |||||||
| Insulation cover material | Aluminum sheet | ||||||
| Header | 99.9 % copper 1” , 22 SWG | ||||||
| Riser | 99.9 % copper ½ “ 24 SWG | ||||||
|
|||||||
| Tank | Single or multiplicatioon of 1000 for higher capacity | ||||||
| Tank type | Cylindrical – horizontal | ||||||
| Tank material (Inner) | Stainless Steel SS 304 (Food Grade) - 0.9 mm | ||||||
| Insulating material for tank | 48 Kg/Cu,metre density Rock wool slab for standard model | ||||||
| Cladding | Aluminum Sheet | ||||||
| Beading & Grommet | E P D M | ||||||
| Working Principle | Thermosyphon | ||||||
| Electrical Back-up | No need - If need 2KVA up to 500 Litr. | ||||||
| Temperature of Hot Water | 60 to 80 degree cel. On normal sunny days depending on the intensity of Sunshine. | ||||||
| Pressure pump model is available *Specifications are subject to change without prior notice". | |||||||
APPLICATIONS:
► In Restaurants Clubs & Resorts ► In Hospitals Hostels Institutions ► In Canteens and Laundries ► For Swimming pool water heating ► In most Process Industries ► In Green buildings to earn renewable energy points ► As In feed hot water to Boilers ► For Can washing at Dairy collection centers ► General washing & cleaning purposes ► In Agricultural sector.
INSTALLATION GUIDELINES
1. Unobstructed sunlight (Shadow free area)
2. Flat (Preferable) or sloping roof area as requested
3. Area should be near to point of usage (bathroom / kitchen) : to avoid long hot water piping and heat losses
4. The system (solar collectors) should face south direction
5. Fresh (cold) water tank at a height @ 5-7 ft above the system tank height
6. 5 years guarantee, onsite after sales service
MG FPC solar Water Heater Picture:-Click Here
MG Flat Plate Collector Waterheater(FPC) PDF Download:Click Now
MG ETC solar Water Heater Details:-Click Here
MG Evacuated Tube Collector Waterheater(ETC) More Images:Click Now
MG Evacuated Tube Collector Waterheater(ETC) PDF Download:Click Now
Solar Water Heater Working Diagram :- Click Here
Product Short Informative Videos:- Click here
Product Detailed Informative Videos:- Click here
Useful technical informative videos:- Click here
Some of our FPC Model Solar water heater installation:-Click Here
Electronic Products Watts Calculator :- Click Here
Flyline Solar Power Plant Installation Video of Murikens:- Click Here
GOVT clients list of Murickens Group :- Click Here
Flyline Solar Power Plant Working Animation :- Click Here
Murickes Brouchure :- Click Here
For quick response & order-call ( 91) 09400464444, 09447366779, 08281848484